Heating function

The heating function is an additional function based on ordinary dolls

1. Insert the official standard AC power cord into the heating power interface 20 centimeters below the left armpit of the doll and connect it to a 220V household power supply. The controller will emit a bee sound. The screen on the controller will display the factory’s default setting of 48 degrees Celsius. After 4 seconds, it will switch to the real-time temperature of the doll and start heating. The heating temperature can be set manually by pressing + or -.
2. Heat is transferred inside to outside. You can feel the heat on the surface of the doll after heating for about 30 minutes. It takes approximately 50 minutes to heat the doll close to the human body temperature. Note: This product will not be affected or damaged within 60 C.To heat quickly wrap it with a blanket. When heated it can remain warm for 3 – 4 hours. When heating, please lie the doll down flat and spread the hands and feet apart.
3. The doll begins to heat when it shows the red light. The controller displays the real-time temperature of the doll. The temperature displayed will rise slowly to reach the temperature set. It will stop heating after showing a green light. If the temperature drops by 5 degrees, the red light turns on and the doll will be heated again.
4. When heating, the controller displays real-time temperature. If the display displays “Err”, it indicates that the controller is not connected to the body of the doll, Or the controller cannot detect the temperature probe. In case of such a problem, please contact our customer service staff.

18 Sentences Dialogue function

This product uses built-in lifelike voice files and 18 sentences of dialogue content.  

It uses a built-in 300 MA battery with a charging voltage of 5V. A full charged battery lasts for about 4 hours. Please charge it at least once every three months.

1. Intelligent dialogue Function: Voice & Keys double as ways to control auto sleep function. Low battery reminder & intelligent charging.
2. To turn On/Off, Long press turn on button, quickly double-press to change the language. Press once to change the dialogue mode.
3. Dialogue conversation

• Where do you come from?
• What is your name?
• How old are you?
• What do your parents do?
• What do you love most?
• Am I handsome?
• I am in a bad mood today!
• You are so beautiful!
• Do you love me?
• I miss you so much!
• Shall we go for a fuck?
• May I hug you?
• See you again
• Do I have a big cock?
• Shall we go for a fuck?
• Higher voice
• Lower voice
• See you again

Note: Only use this dialogue function when the speaker turns off. Alternatively, use the earphone.

1. Auto sleep function: The doll will automatically turn off after 2 minutes of no touching or saying anything.
2. Low battery reminder & intelligent charging: The indicator flashes when the battery is low and when charging. It stays on when fully charged.
3. Volume control: Control the volume by saying “Higher voice or Lower voice”.
4. Sensor: It is installed inside the head and triggers when it detects moving objects.

Auto Clamp Function

Please watch the video to know more about Auto Clamp Function, you could select it in the Extra Option Selection on the right side of the product main pages.

Click Here To Buy Dolls Castle Sex Love Dolls