AIBEI Hybrid Dolls FAQ

Material Compatibility:

All silicone doll body types support this feature. For TPE doll body compatibility, please refer to the image below.

Quick Steps:

Before first use, fully charge the device (about 2–3 hours). When the LED turns solid, unplug the charger.

Quick Steps:

1. Connect the hose to the doll’s vent hole.
2. Long-press the power button (~1.5 s) to turn on; LED stays on.
3. Press the power button again to switch between 4 languages (Chinese / English / Japanese / Korean).
4. Tap the Mode button to cycle through 3 suction modes (Low / Medium / High).
5. Unplug while in use; the device won’t operate during charging.

For private listening, plug in earphones; otherwise, sound plays through the built-in speaker.

📹 Operation Video:

Material Compatibility:

All silicone doll body types support this feature. For TPE doll body compatibility, please refer to the image below.

Quick Steps:

1. Connect a USB Type-C cable to the oral heating port.
2. Heat for 15–20 minutes; the inner mouth temperature will reach 37–40 °C.
3. Once you feel a clear warmth, unplug the cable and begin use.

Safety Note: Do not leave the doll unattended while heating, and avoid prolonged heating to prevent damage from overheating.

Auto Blow job - Neck Move function

This function recreates a realistic oral experience by driving mechanical neck movement.

Note: the head is installed separately and contains no motor; the motion is generated entirely by the neck system. Unlike auto-suction designs, Neck Motion focuses solely on rhythmic forward-and-back movement without automatic oral gripping.

Material Compatibility:

This function is only compatible with dolls that have TPE bodies; for specific models, please refer to the diagram at the end. Dolls with silicone bodies are not compatible.

Quick Setup & Operation

• Controller & Power Connect the controller at the doll’s back; power is supplied via a DCadapter. Switch on the controller to activate the system.
• Speed Control A stepless speed dial lets you fine-tune neck movement to your preference.
• Synchronized Motion The neck’s forward/back motion aligns naturally with jaw movement. When used with an adjustable-jaw head (ROS-type), an optimal coverage position—around 15 cm (5.9 in)—can be achieved for greater comfort.

Care Tips

• This feature does not include automatic oral gripping, so the sensation differs from dual-stimulation systems.
• Check the power connection before use, and keep the controller and port dry at all times.

📹 Operation Video:

Image: Compatibility of each feature with TPE dolls

– Please refer to the compatibility chart before use to ensure the best experience.

Electric waist&Hips function(Aibei)

This function recreates a lifelike waist and hip movement by driving an internal electric mechanism.

Material Compatibility:

This function is only compatible with dolls that have TPE bodies; for specific models, please refer to the diagram at the end. Dolls with silicone bodies are not compatible.

Quick Setup & Operation

• Controller & Power Connect the controller at the doll’s back; power is supplied via a DCadapter. Switch on the controller to activate the system.
• Speed Control A stepless speed dial lets you adjust the waist and hip movement to your preference.

📹 Operation Video:

Which Body Points Activate the Moaning System?

The moaning system uses a Five-Point Touch Trigger strategically placed on the doll’s body:

• two on the chest
• two on the inner thighs
• one above the vaginal area (see reference image)

A built-in speaker module provides lifelike sound, and a 3.5 mm headphone jack is available for private audio playback, giving you flexible and comfortable use options.

Language Support:

The system currently supports Chinese + EnglishorChinese + Japanese, with the specific language pack pre-installed according to the destination country/region at the time of shipping.

Compatibility:

All silicone doll body types support this feature. For TPE doll body compatibility, please refer to the image below.

Step-by-Step Guide for Using the Heating Rod

1. Connect the included USB Type-C cable to the heating rod.
2. Insert the rod gently into the vaginal canal.
3. Allow it to warm for about 15–20 minutes; the internal temperature will reach roughly 37–40 °C (98–104 °F).
4. Once you feel a noticeable warmth, remove the rod and unplug the cable before use.

Note: Never leave the doll unattended while heating. Avoid prolonged or excessive heating to prevent damage to the silicone or TPE material.

Material Compatibility:

A vaginal heating rod is included free with every order; no purchase is necessary. This feature is compatible with all Aibei silicone doll bodies.

Power Supply:

• Connect the DC power cord at the back of the neck.
• Turn on the heating switch and start with the minimum temperature.
• Adjust to the desired maximum temperature as needed (controller range: 55–60°C).

Usage Tips:

• Cover the doll fully with a towel or blanket during heating.
• Heat for about 3 hours to reach optimal warmth; adjust time based on ambient temperature.
• Follow the controller’s recommended temperature range to achieve the desired effect.

Note: The 55–60°C range refers to the controller setting, not the doll’s actual body temperature.

Currently, the 65 cm Big Breast, 65 cm Medium Breast, and 65 cm Flat Chest models are not compatible with this body-heating system.

Compatibility:

This function is only compatible with dolls that have TPE bodies; for specific models, please refer to the diagram at the end.

A: Detachable arms and legs make your doll easier to clean, dress, and store—perfect for maintaining hygiene and flexibility. While they may slightly reduce overall stability compared to fixed limbs, the convenience often outweighs this minor drawback.

Top brands offering detachable arms and legs include Dolls Castle, AiBei, Funwest, and Topfire—giving you more freedom and ease in doll care.

The movable eyelid feature works with TPE heads 225, 228, 231, 232, 234, 233, 235, 236, 237, and 205, and all silicone heads support this function.